If you are using some functionality that is very new in MySQL, you can try to run mysqld with the -skip-new (which will disable all new, potentially unsafe functionality) or with -safe-mode which disables a lot of optimisation that may cause problems. Section A.4.1, “What To Do If MySQL Keeps Crashing ”.
If mysqld doesn't want to start, you should check that you don't have any my.cnf files that interfere with your setup! You can check your my.cnf arguments with mysqld -print-defaults and avoid using them by starting with mysqld -no-defaults ....
If mysqld starts to eat up CPU or memory or if it "hangs", you can use mysqladmin processlist status to find out if someone is executing a query that takes a long time. It may be a good idea to run mysqladmin -i10 processlist status in some window if you are experiencing performance problems or problems when new clients can't connect.
The command mysqladmin debug will dump some information about locks in use, used memory and query usage to the mysql log file. This may help solve some problems. This command also provides some useful information even if you haven't compiled MySQL for debugging!
If the problem is that some tables are getting slower and slower you should try to optimise the table with OPTIMIZE TABLE or myisamchk. Chapter 4, Database Administration . You should also check the slow queries with EXPLAIN.
You should also read the OS-specific section in this manual for problems that may be unique to your environment. Section 2.6, “Operating System Specific Notes ”.
If you have some very specific problem, you can always try to debug MySQL. To do this you must configure MySQL with the -with-debug or the -with-debug=full option. You can check whether MySQL was compiled with debugging by doing: mysqld -help. If the -debug flag is listed with the options then you have debugging enabled. mysqladmin ver also lists the mysqld version as mysql ... -debug in this case.
If you are using gcc or egcs, the recommended configure line is:
CC=gcc CFLAGS="-O2" CXX=gcc CXXFLAGS="-O2 -felide-constructors \ -fno-exceptions -fno-rtti" ./configure --prefix=/usr/local/mysql \ --with-debug --with-extra-charsets=complex
This will avoid problems with the libstdc++ library and with C++ exceptions (many compilers have problems with C++ exceptions in threaded code) and compile a MySQL version with support for all character sets.
If you suspect a memory overrun error, you can configure MySQL with -with-debug=full, which will install a memory allocation (SAFEMALLOC) checker. Running with SAFEMALLOC is however quite slow, so if you get performance problems you should start mysqld with the -skip-safemalloc option. This will disable the memory overrun checks for each call to malloc() and free().
If mysqld stops crashing when you compile it with -with-debug, you have probably found a compiler bug or a timing bug within MySQL. In this case you can try to add -g to the CFLAGS and CXXFLAGS variables above and not use -with-debug. If mysqld now dies, you can at least attach to it with gdb or use gdb on the core file to find out what happened.
When you configure MySQL for debugging you automatically enable a lot of extra safety check functions that monitor the health of mysqld. If they find something "unexpected," an entry will be written to stderr, which safe_mysqld directs to the error log! This also means that if you are having some unexpected problems with MySQL and are using a source distribution, the first thing you should do is to configure MySQL for debugging! (The second thing, of course, is to send mail to a MySQL mailing list and ask for help. Section 1.6.1.1, “The MySQL Mailing Lists ”. Please use the mysqlbug script for all bug reports or questions regarding the MySQL version you are using!
In the Windows MySQL distribution, mysqld.exe is by default compiled with support for trace files.
If the mysqld server doesn't start or if you can cause the mysqld server to crash quickly, you can try to create a trace file to find the problem.
To do this you have to have a mysqld that is compiled for debugging. You can check this by executing mysqld -V. If the version number ends with -debug, it's compiled with support for trace files.
Start the mysqld server with a trace log in /tmp/mysqld.trace (or C:\mysqld.trace on Windows):
mysqld -debug
On Windows you should also use the -standalone flag to not start mysqld as a service:
In a console window do:
mysqld --debug --standalone
After this you can use the mysql.exe command-line tool in a second console window to reproduce the problem. You can take down the above mysqld server with mysqladmin shutdown.
Note that the trace file will get very big! If you want to have a smaller trace file, you can use something like:
mysqld -debug=d,info,error,query,general,where:O,/tmp/mysqld.trace
which only prints information with the most interesting tags in /tmp/mysqld.trace.
If you make a bug report about this, please only send the lines from the trace file to the appropriate mailing list where something seems to go wrong! If you can't locate the wrong place, you can ftp the trace file, together with a full bug report, to ftp://support.mysql.com/pub/mysql/secret/ so that a MySQL developer can take a look a this.
The trace file is made with the DBUG package by Fred Fish. Section E.3, “The DBUG Package ”.
On most systems you can also start mysqld from gdb to get more information if mysqld crashes.
With some older gdb versions on Linux you must use run -one-thread if you want to be able to debug mysqld threads. In this case you can only have one thread active at a time. We recommend you to upgrade to gdb 5.1 ASAP as thread debugging works much better with this version!
When running mysqld under gdb, you should disable the stack trace with -skip-stack-trace to be able to catch segfaults within gdb.
In MySQL 4.0.14 and above you should use the -gdb option to mysqld. This will install an interrupt handler for SIGINT (needed to stop mysqld with ^C to set breakpoints) and disable stack tracing and core file handling.
It's very hard to debug MySQL under gdb if you do a lot of new connections the whole time as gdb doesn't free the memory for old threads. You can avoid this problem by starting mysqld with -O thread_cache_size= 'max_connections +1'. In most cases just using -O thread_cache_size=5' will help a lot!
If you want to get a core dump on Linux if mysqld dies with a SIGSEGV signal, you can start mysqld with the -core-file option. This core file can be used to make a backtrace that may help you find out why mysqld died:
shell gdb mysqld core gdb backtrace full gdb exit
Section A.4.1, “What To Do If MySQL Keeps Crashing ”.
If you are using gdb 4.17.x or above on Linux, you should install a .gdb file, with the following information, in your current directory:
set print sevenbit off handle SIGUSR1 nostop noprint handle SIGUSR2 nostop noprint handle SIGWAITING nostop noprint handle SIGLWP nostop noprint handle SIGPIPE nostop handle SIGALRM nostop handle SIGHUP nostop handle SIGTERM nostop noprint
If you have problems debugging threads with gdb, you should download gdb 5.x and try this instead. The new gdb version has very improved thread handling!
Here is an example how to debug mysqld:
shell gdb /usr/local/libexec/mysqld gdb run ... backtrace full # Do this when mysqld crashes
Include the above output in a mail generated with mysqlbug and mail this to the general MySQL mailing list. Section 1.6.1.1, “The MySQL Mailing Lists ”.
If mysqld hangs you can try to use some system tools like strace or /usr/proc/bin/pstack to examine where mysqld has hung.
strace /tmp/log libexec/mysqld
If you are using the Perl DBI interface, you can turn on debugging information by using the trace method or by setting the DBI_TRACE environment variable. Section 9.5.2, “The DBI Interface ”.
On some operating systems, the error log will contain a stack trace if mysqld dies unexpectedly. You can use this to find out where (and maybe why) mysqld died. Section 4.9.1, “The Error Log ”. To get a stack trace, you must not compile mysqld with the -fomit-frame-pointer option to gcc. Section E.1.1, “Compiling MYSQL for Debugging ”.
If the error file contains something like the following:
mysqld got signal 11; The manual section 'Debugging a MySQL server' tells you how to use a stack trace and/or the core file to produce a readable backtrace that may help in finding out why mysqld died Attemping backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong stack range sanity check, ok, backtrace follows 0x40077552 0x81281a0 0x8128f47 0x8127be0 0x8127995 0x8104947 0x80ff28f 0x810131b 0x80ee4bc 0x80c3c91 0x80c6b43 0x80c1fd9 0x80c1686
you can find where mysqld died by doing the following:
Copy the above numbers to a file, for example mysqld.stack.
Make a symbol file for the mysqld server:
nm -n libexec/mysqld /tmp/mysqld.sym
Note that most MySQL binary distributions (except for the "debug" packages, where this information is included inside of the binaries themselves) already ship with the above file, named mysqld.sym.gz. In this case you can simply unpack it by doing:
gunzip bin/mysqld.sym.gz /tmp/mysqld.sym
Execute resolve_stack_dump -s /tmp/mysqld.sym -n mysqld.stack.
This will print out where mysqld died. If this doesn't help you find out why mysqld died, you should make a bug report and include the output from the above command with the bug report.
Note however that in most cases it will not help us to just have a stack trace to find the reason for the problem. To be able to locate the bug or provide a workaround, we would in most cases need to know the query that killed mysqld and preferable a test case so that we can repeat the problem! Section 1.6.1.3, “How to Report Bugs or Problems ”.
Note that before starting mysqld with -log you should check all your tables with myisamchk. Chapter 4, Database Administration .
If mysqld dies or hangs, you should start mysqld with -log. When mysqld dies again, you can examine the end of the log file for the query that killed mysqld.
If you are using -log without a file name, the log is stored in the database directory as 'hostname'.log In most cases it's the last query in the log file that killed mysqld, but if possible you should verify this by restarting mysqld and executing the found query from the mysql command-line tools. If this works, you should also test all complicated queries that didn't complete.
You can also try the command EXPLAIN on all SELECT statements that takes a long time to ensure that mysqld is using indexes properly. Section 5.2.1, “EXPLAIN Syntax (Get Information About a SELECT) ”.
You can find the queries that take a long time to execute by starting mysqld with -log-slow-queries. Section 4.9.5, “The Slow Query Log ”.
If you find the text mysqld restarted in the error log file (normally named hostname.err) you have probably found a query that causes mysqld to fail. If this happens you should check all your tables with myisamchk (Chapter 4, Database Administration ), and test the queries in the MySQL log files to see if one doesn't work. If you find such a query, try first upgrading to the newest MySQL version. If this doesn't help and you can't find anything in the mysql mail archive, you should report the bug to a MySQL mailing list. The mailing lists are described at http://lists.mysql.com/, which also has links to online list archives.
If you have started mysqld with myisam-recover, MySQL will automatically check and try to repair MyISAM tables if they are marked as 'not closed properly' or 'crashed'. If this happens, MySQL will write an entry in the hostname.err file 'Warning: Checking table ...' which is followed by Warning: Repairing table if the table needs to be repaired. If you get a lot of these errors, without mysqld having died unexpectedly just before, then something is wrong and needs to be investigated further. Section 4.1.1, “mysqld Command-line Options ”.
It's of course not a good sign if mysqld did died unexpectedly, but in this case one shouldn't investigate the Checking table... messages but instead try to find out why mysqld died.
If you get corrupted tables or if mysqld always fails after some update commands, you can test if this bug is reproducible by doing the following:
Take down the MySQL daemon (with mysqladmin shutdown).
Make a backup of the tables (to guard against the very unlikely case that the repair will do something bad).
Check all tables with myisamchk -s database/*.MYI. Repair any wrong tables with myisamchk -r database/table.MYI.
Make a second backup of the tables.
Remove (or move away) any old log files from the MySQL data directory if you need more space.
Start mysqld with -log-bin. Section 4.9.4, “The Binary Log ”. If you want to find a query that crashes mysqld, you should use -log -log-bin.
When you have gotten a crashed table, stop the mysqld server.
Restore the backup.
Restart the mysqld server without-log-bin
Re-execute the commands with mysqlbinlog update-log-file | mysql. The update log is saved in the MySQL database directory with the name hostname-bin.#.
If the tables are corrupted again or you can get mysqld to die with the above command, you have found reproducible bug that should be easy to fix! FTP the tables and the binary log to ftp://support.mysql.com/pub/mysql/secret/ and enter it into our bugs system at http://bugs.mysql.com/. If you are a support customer), you can also mailto:support@@mysql.com to alert the MySQL team about the problem and have it fixed as soon as possible.
You can also use the script mysql_find_rows to just execute some of the update statements if you want to narrow down the problem.